Start with the head side of the table and glue or staple the center edge of the felt in place. Ensure that the felt is positioned in an exact location, keeping in mind the pocket holes and aiming for full surface coverage. Laying Out the Feltįor this step, you’ll have to focus on one side at a time. When everything looks balanced, use your drilling machine or regular screwdriver to secure the screws in the proper places. Otherwise, you’ll have to redo it to adjust the balance of your table. The level should be accurate and in the center. Take your carpenter’s leveler and check if the table is balanced. Then place the next two slates on the open spaces beside the center tile to fill the frame. Start with the center tile, which you should position at the center of the table. This can be easier said than done because slates are heavy pieces of hardware that need to be positioned properly to keep the table balanced.Ĭall a friend or ask someone to help you carry the slates and position them on top of the frame that you’ve successfully built. Using your screwdriver, fasten the screws and bolts securely. Gather the hardware and the appropriate screws, as set forth in your user’s manual. Refer to the installation and assembly guidelines that should have come with your pool table. Take the main table cabinet and lay it upside down on the space you have allocated for the pool table. However, some models will need the extra work of building the frame yourself. Some frames are delivered already preassembled, so all that’s left for you to do is to attach the legs. Building the Frame and Attaching the Legs If there’s anything missing, hold off your assembly efforts and contact your supplier to send you the missing pieces first. Also, don’t forget to check your manual to see if all the parts are complete. This will make it easier for you to find the pieces when you need them. Hardware should go together, and nuts and bolts should all be in one place. Once you remove the packaging, organize the parts in their own designated category. You wouldn’t want to damage your table before you even get the chance to use it. Be extra careful while removing the packaging, as pool tables are made of delicate wood. You simply need to rip the plastic off or tear the cardboard, right? Removing the parts from the packaging might seem easy enough. Removing the Packaging and Organizing the Parts This should be enough room for the players to move around freely and position their cues to make their shots. As much as possible, adhere to a minimum allowance of 5 feet of space on all sides of the table. The space you have should be bigger than the dimensions of the pool table itself. But excitement aside, figure out if you’ve nailed the measurements. You might have already done this in anticipation of your delivery. Once it’s assembled, it will be difficult for you to move it around, so you should nail the space first over anything else. Finding a Space for Your Pool Tableīefore you pick up your tools and start assembling, you first have to select the perfect space for your pool table. If you have a different type, you may need to undertake a different procedure. These steps reflect the procedure of assembling a 3-piece slate pool table. Once you have your tools and equipment ready - and the complete parts of your pool table, of course, you’re now set to start assembling. Felt (also known as a pool table cloth).Finding the right tools for the job is absolutely critical to make the assembly process seamless.īefore the pool table is even delivered to your doorstep, you’ll want to have these tools ready so that you can begin your assembly immediately. To get started, you will first need your tools.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |